Durability and design in one panel. Our Privacy Screens provide stylish privacy, easy installation, and weather-resistant performance.
Manual Assembly Metal Post and Privacy Screens
Manual Assembly
Metal Post
This manual demonstrates the installation of VC METAL DECOR Screens using Mounting Posts on a wood or composite deck surface.
Post Installation into Wood and Composite Surface
Easy Setup for Lasting Stability
Follow our simple installation process to secure your posts on wood or composite surfaces, ensuring a sturdy foundation for your Privacy Screens.
1. Place the Posts
Position the posts in your preferred spots and measure the gap between them to ensure they are precisely 3 feet and 1/16 inch apart. Ensure adequate backing is in place for stability and safety.
2. Fasten the Posts
Once you’ve verified your measurements, secure the posts by inserting GRK Structural Screws through the pre-drilled holes on the base plate into your deck surface.
3.Secure the Base
The lag bolts are available separately. Select the suitable anchoring bolts according to your specific application requirements.
4. Secure the Posts
Double Check your installation with a level on both side of the post. Fully fasten, and secure the posts.
Post Installation into Concrete Surface
Strong Anchoring for Maximum Support
Our installation process makes it easy to secure posts on concrete surfaces, providing a reliable and durable base for your Privacy Screens.
1. Place the Posts
These instructions outline how to install the VC METAL DECOR Posts on a concrete deck or patio. Please consult the Installation options provided to determine the correct spacing between the posts.
2. Fasten the Posts
After confirming your measurements, mark baseplate holes on concrete and drill holes in accordance to wedge anchor specifications. Ensure your holes are precise as incorrect placement can cause mounting issues.
3. Place the Wedge Anchors
After drilling the holes, insert the wedge anchors and hammer them firmly into position.
4. Secure the Posts
Fasten and secure the post to the concrete. Double check your installation with a level on both side of the post. Refer to the respective screen installation tutorial for remainder of the assembly.
Manual Assembly
Privacy Screens
This guide provides clear, step-by-step instructions to install your Privacy Screens on both metal and wood posts. Whether enhancing your deck, patio, or garden, you’ll achieve a secure and stylish installation built to last.
Built to fit your space. Privacy Screens adapt seamlessly to both metal and wood posts.
1. Place the Screens Between the Posts
Insert the Privacy Screens carefully between the posts, ensuring proper alignment and spacing.
2.Correct Positioning Inside the Post
The screens should fit with a 1-inch clearance on each side within the post for secure placement.
Base Clearance
Maintain a 3-inch gap between the bottom of the screen and the surface to ensure stability, drainage, and a clean finish.
Affix the Privacy Screen
Make sure the “L” side is oriented with the flat face towards the inside and the privacy screen facing outward. Place the privacy screen inside the post, precisely centered. Secure the mounting bracket to the post using the provided self-tapping screws.
4. Place the Post Caps
Position the included post caps directly above each post and align them for a proper fit.
Final Placement
Once inserted, the post caps provide a neat finish and added protection against weather exposure.
Do you have any questions about the installation process?
Don’t worry! Our technical support is here to help! We have a team ready to assist you with anything you need.
Get in touch with us and we’d be happy to answer your questions or comments.